CrimeStopper FS-89 Betriebsanleitung PDF herunterladen (Seite 7)

or Arming / Locking:

Press the Lock Icon on the front screen or the side Lock button on the remote control. The

System will arm and confirm with one siren and horn chirp, one park lights flash, and the

LED will begin to flash slowly. Power locks will lock (if equipped). The starter disable circuit

will turn on. The 2-Way LCD Pager will give voice confirmation “System Armed” while

displaying a Lock Icon on front. After a short delay, the system will be completely

armed.

NOTE: The siren and horn chirps are programmable ON or OFF (option # 4).

Open Door Alert / Bypass:

Upon arming, the system will warn you if a door, hood or trunk is

left open. The remote will show the open Door, Hood or Truck

along with a voice alert. The system will also chirp and flash the

parking lights 4 times to warn you of a problem. The system will wait up to 45 seconds

(programmable 0, 15, 30, 45 seconds) for the dome light to turn off. The open zone will

automatically be bypassed until closed. The alarm will continue to protect all other zones.

or Car Finder Mode:

When the alarm system is armed, press the Lock Icon or button. The siren, horn and lights

will flash 6 times. This is useful in a large parking lot to help find your car.

or Disarming / Unlocking:

Press the Unlock Icon on the front screen or the side Unlock button on the remote control.

The System will disarm and confirm with two chirps, two light flashes, and the LED will turn

off. Power locks will unlock and Interior Dome light will turn on (if installed with these

optional features). The 2-Way LCD Pager will confirm with “System Disarmed” while

displaying an Unlock Icon on front.

Driver’s Door Priority Unlock: Optional connection required

This option separates unlock of the driver’s door from the passenger doors with the remote

control. There are 2 choices of operation.

• Default = Press and hold the Unlock Icon for 2 seconds to unlock all doors.

• Press the Unlock Icon 2 times to unlock all doors.

This is Remote Channel 2 output (Option # 10). This output can also be programmed for

other auxiliary functions, consult your installer.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Keine Kommentare

CrimeStopper FS-89 Betriebsanleitung Seite 7