CrimeStopper RS-901 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Fernbedingungen CrimeStopper RS-901 herunter. RS-900.IV Install - Crimestopper Security Products Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 16
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
RS900/RS901 SERIES IV
RS999 FM FLASHBACK™
REMOTE ENGINE STARTING SYSTEM
INSTALLATION INSTRUCTIONS
PRE-INSTALLATION CONSIDERATIONS
To ease installation, we suggest that you READ THIS MANUAL and consider the following points before
beginning your installation:
BEFORE BEGINNING, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS,
ABS BRAKES, ENGINE / BODY COMPUTER AND BATTERY).
PLAN OUT YOUR INSTALLATION and determine most suitable locations for all components to be placed. These
components include: the module itself, valet/program button, possible relays, and antenna/receiver (RS900/999FM only,
RS901 model does not include antenna or remotes.) Allow enough wire to create a service loop with strain relief, should
servicing be required. This will also allow easier access and mounting.
DAMAGE resulting from incorrect installation or failure to follow guidelines stated in this book will not be covered under
warranty and subject to repair or replacement charges.
USE A VOLT/OHM METER to test and locate all connections. Test Lights can damage a vehicle’s computer systems.
ADDITIONAL PARTS, which are not included with this unit, may be needed for your particular vehicle. . These items may
include extra relays (Part#CS-402A), General Motors Anti-Theft System Bypass modules for Vats / Passkey® / Passlock®
Systems, (Part# CS-GMATA II) or Transponder Anti-Theft Adapter modules (Part # CS-TATA).
TECHNICAL SUPPORT: (800) 998-6880
Monday - Friday 8:00am - 4:30pm Pacific Std. Time
Web Site: www.crimestopper.com
E-mail: tech-[email protected]
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
REV A - 8.2001
This device complies with FCC Rules part 15. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2
) This device must accept any interference that
may be received, including interference that may cause undesired
operation. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such
modification could void the user’s authority to use the
equipment.
Seitenansicht 0
1 2 3 4 5 6 ... 15 16

Inhaltsverzeichnis

Seite 1 - SERIES IV

RS900/RS901 SERIES IV RS999 FM FLASHBACK™ REMOTE ENGINE STARTING SYSTEM INSTALLATION INSTRUCTIONS PRE-INSTALLATION CONSIDERATIONS To ease install

Seite 2 - TABLE OF CONTENTS

TACH FINDER & TACH PROGRAMMING TACH FINDER MODE: This system now includes a Tach Finder mode to assist in locating a valid or viable tach source

Seite 3 - WIRING INSTRUCTIONS

900 IV TRANSMITTER / 999FM TRANSCEIVER CODE LEARNING Transmitter/Transceiver Code Learning: (Excludes RS901) Note: All transmitter codes must be lea

Seite 4

2-VEHICLE OPERATION An RS900 Series IV remote control can be used to Remote Start a second vehicle with an identical RS900 Series IV system installed

Seite 5

OPTION PROGRAMMING OPTIONS CHART * = DEFAULT Option # Option Description Option Values Button #1 LOCK Button #2 UNLOCK 1. Tach Learning

Seite 6 - IGNITION SWITCH WIRING

PROGRAMMABLE OPTIONS 2. Auto Lock/Unlock with Ignition: Controls whether the doors will automatically lock when the ignition is turned on and will un

Seite 7 - POWER DOOR LOCK WIRING

PROGRAMMABLE OPTIONS 12. Yellow/Black (-) Negative IGN or ANTI-GRIND Output: This option controls the units Negative multi-function output. Default:

Seite 8 - JUMPER PIN DIAGRAM

TRANSMISSIONPROGRAMPARKINGLIGHTSSWITCHECURS900/901ANTENNA/RECEIVERPLUGLEDCOIL+-(-) UNLOCK OUTPUT+12 V FOR RELAYS+15A or -.5A(-) LOCK OUTPUTENGINEECUG

Seite 9 - TACH (RPM) REFERENCE MODE

TABLE OF CONTENTS Pre-Installation Considerations…………….………...……...………………………………………………………Front Cover Cautions & Warnings…….………………….………..…..…………………

Seite 10

WIRING INSTRUCTIONS PROGRAM/OVERRIDE SWITCH: 2 PIN PLUG This switch is used for programming features, transmitters, valet mode, and to override the o

Seite 11

WIRING INSTRUCTIONS PIN 4: YELLOW/BLACK FOR NEGATIVE IGNITION OUTPUT: YELLOW/BLACK858630 873rd IGN (If needed)IGN SW.ORANTI-THEFT/MODULE+12V CONST

Seite 12 - OPTION PROGRAMMING

WIRING INSTRUCTIONS PIN 5: TAN: (-) AUX OUTPUT (TRUNK POP) This output will provide a ground pulse when button #3 (Trunk) on the remote transmitter i

Seite 13

IGNITION SWITCH WIRING 6 PIN HIGH-CURRENT CONNECTOR: PIN 1: BROWN 14 GA.: STARTER OUTPUT (30A) PIN 2: GRAY 14 GA.: ACCESSORY / IGNITION 2 (30A)

Seite 14 - PROGRAMMABLE OPTIONS

POWER DOOR LOCK WIRING 3 PIN DOOR LOCK PLUG: PIN 1: GREEN: (-) Negative pulse for LOCK PIN 2: RED: +12V Coil Power for external relays TERM 86. PIN 3

Seite 15

POWER DOOR LOCK WIRING AFTERMARKET MOTOR/DOOR LOCK WIRINGREVERSE POLARITY DOOR LOCK WIRINGGREENGREENFUSEDFUSEDREDRED+12V+12VBLUEBLUE++8685868586858685

Seite 16 - RS900/901

IMPROVED “SMART TACHLESS” MODE This RS900/901/999FM systems includes a unique voltage monitor system called “Smart Tachless” mode. This mode allows

Kommentare zu diesen Handbüchern

Keine Kommentare